Fits :
Type-1 engines and replaces the Solex:
34 PICT-3
34 PICT-4
Paruzzi number : 02142
You searched for a part for your distributor. Many different distributors have been used over the years, in many cases they are interchangeable on other engines. The chance that your distributor is not what was installed by Volkswagen at the time is great. If you use our 'Distributor / ignition Tool', all available parts for your distributor are shown.
Fits :
Type-1 8.1960 and later
Karmann Ghia 8.1960 and later
Bus 1200/1300/1500/1600cc 8.1960 and later
Vanagon/T25 Waterboxer engines
Type-3
Thing
Paruzzi number : 01783
Fits :
Type-1 engines (except 25hp and 30hp engines)
Type-3 engines
CT/CZ engines
Type-4 engines
Note:
For cars with a stock 12V electronic ignition use only coil No
Paruzzi number : 02246
Fits :
Type-1 engines (except 25hp+30hp engines)
Type-3 engines
CT/CZ engines
Type-4 engines
Note:
For cars with a stock 12V electronic ignition use only coil No
Paruzzi number : 02247
Fits :
Type-1 engines (except 25hp+30hp engines)
Type-3 engines
CT/CZ engines
Type-4 engines
Note:
For cars with a stock 12V electronic ignition use only coil No
Paruzzi number : 02248
Fits :
stock applications:
Beetle 1303 until 7.1973
Karmann Ghia 8.1966 and later
Bus 8.1972 and later
Type 3 8.1971 and later
universal use:
for all models and years
Specifications:
Voltage: 12V
Maximum amperage: 40 Ampere
Paruzzi number : 00683
Fits :
Type-1 engines 1200cc (30hp+34hp)
Specifications:
Bore: 77.5 mm
Thickness upper compression ring: 2.50 mm
Thickness lower compression ring: 2.50 mm
Thickness oil control ring: 4.00 mm
Paruzzi number : 01697
Fits :
Type-1 engines 1600cc
Type-3 engines 1600cc
Specifications:
Bore: 86.0 mm
Thickness upper compression ring: 2.00 mm
Thickness lower compression ring: 2.00 mm
Thickness oil control ring: 5.00 mm
Paruzzi number : 01827
Fits :
Type-1 engines 1300cc
Specifications:
Bore: 77.5 mm
Thickness upper compression ring: 2.00 mm
Thickness lower compression ring: 2.00 mm
Thickness oil control ring: 4.00 mm
Paruzzi number : 01818
Fits :
Set of engine piston rings Fiat OHV engines
Specifications:
Bore: 65.04 mm
Thickness upper compression ring: 1.75 mm
Thickness lower compression ring: 2.00 mm
Thickness oil control ring: 4.00 mm
Paruzzi number : 590748